Alternatives

Nihil and the tools you already use.

Wokwi, Renode and KiCad’s simulator are good at what they do, and none of them is a one-for-one stand-in for Nihil. Here is what each is, in its own words, what Nihil does differently, and when you should pick the other one.

Side by side
ToolWhat it is, per its own docsReach for it whenWhere Nihil differs
Wokwi A simulator for Arduino, ESP32, STM32 and many other boards, parts and sensors, with its own CI documentation. You want a quick virtual board for a supported chip, or firmware tests in CI against it. Nihil solves the board’s circuit (rails, copper, heat, buses) under the firmware, runs a physics twin, and gates PCB output. It models nineteen microcontrollers; Wokwi names far more.
Renode An open-source framework from Antmicro that emulates CPUs, peripherals and sensors, with 12+ CPU architectures, 1,200+ boards and 800+ peripheral models, and CI and Robot Framework integrations. You need your compiled binary running on an emulated CPU, across many architectures and boards. Nihil runs your control core as C on a chip model rather than emulating the CPU, in exchange for a circuit solver, the twin, the agent tools and the PCB pipeline around it.
KiCad simulator Circuit simulation with ngspice, built into the schematic editor, with models assigned per symbol. You want to SPICE a schematic while you draw it. Nihil takes the KiCad project as input and adds firmware in the loop, the routed copper, a twin, stress rules and a record. It does not replace KiCad’s editor.
KiCad MCP servers and skills Ways to let an agent such as Claude Code read and edit KiCad projects, which the JLCPCB walkthrough says still need engineering verification. You want an agent in KiCad itself. Nihil’s agent edits the board and also runs the simulator and the gates, so the verdict comes from the engine.
A real-time HIL rig Real controller hardware connected to a real-time plant simulator, as OPAL-RT describes it. You must prove timing and I/O on the real silicon. Nihil does not replace one. It finds the logic and electrical faults first, and tells you which constants the rig must settle.

How they fit together

Most of this is a stack rather than a choice. KiCad is where many boards are drawn, and Nihil imports a KiCad project directly. An emulator that runs your compiled binary and Nihil’s control-core simulation answer different questions: whether the shipped image boots and behaves on the CPU, and whether the control logic survives the electrical and physical world around it. A bench or HIL rig answers what neither can. See hardware-in-the-loop, untangled.

When Nihil is the wrong pick

  • You need your exact compiled image emulated instruction by instruction. Nihil does not do that.
  • You want to open a browser and play with no install. The demo is read-only.
  • You need the real-time, certified plant simulation of a HIL vendor.
  • You want it now: the desktop app is in invite-only alpha.

Where Nihil is the pick

  • You want one project holding the board, the enclosure, the firmware and the twin, with a record of every run.
  • You already work with a coding agent and want it to design, simulate and prove, not just write.
  • You want the answer to “is this board safe to order” to be four gates, the circuit stress test among them, rather than a feeling.

See it run on a real board.

The demo project is an RC car, its two boards, its twin and every gate’s record, in the real app, read-only, in a tab. The desktop app is in invite-only alpha for Windows, macOS and Linux.